Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture seeps in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, wet environment is ideal for mold and mildew and other kinds of foul-smelling things.
If moisture has penetrated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and stinky slime, but also make the cover really hard to remove, and not as efficient at keeping the heat in the spa. Time for a better type of Swim Spa Cover

Smelly Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or used areas, torn joints. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining off properly, will eventually start to puddle water, which is most likely time to purchase a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also problem, and although you can fend off the unavoidable with a duct tape repair work, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can withstand longer durations, however it’s an excellent practice to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow wetness to get away do so, however don’t remove delicate foam panels unless absolutely required.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it will not stop moisture extremely well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded joint are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine service is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not kept routinely with sanitizer and filtering, or is not shocked often enough, bacteria and algae can benefit from a congenial environment to thrive. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near the spa, it absorbs the chemistry of the spa. Tidy, clear and hygienic water is the very best environment to prevent smelly spa covers. (Sorry but this is simply BS) The reality is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Lightweight Swim Spa Covers, unless your back deck is covered or your spa is in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it always looks fantastic, and is protected from the aspects. Once again, this actually isn’t really going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealer pay their bills. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Repair Your Swim Spa Cover!
• Remove to Safe Location: This initial step may appear obvious, however you need a great location to permit the cover to sit undisturbed from pets, wild animals, and winds. It needs to be a sunny location if possible, or a dry indoor area with low humidity can likewise be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Don’t use household cleaning products on your Swim Spa Cover, odd chemicals can wind up in your spa water. Carefully tidy all exterior surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, because the panels could become damaged during elimination or cleaning. But if you identify that there is something slimy inside, you can usually unzip and get rid of the panel for a cleansing inside and out.

How often does your spa dealership expect you to do all this? If your swim spa is protected from a lot of sun and rain, twice annually. If it’s out in the open it needs to be 3-4 times each year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Much better Choice
The most convenient cure for a foul-smelling Swim Spa Cover is to just buy a various kind of Swim Spa Cover A foul-smelling swim spa cover simply suggests that your cover is taking on wetness, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam however has sealed air chambers instead will prevent providing the mold and mildew a location to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *